Tell me if this is wall hanger

[Dean Romig]

Well Louis, it definitely needs some stock work but first the root cause must be determined then the stock should be properly repaired. The problems with the safety and trigger are very likely to be caused by hardened oil and crud in the mechanism preventing proper operation. A good internal cleaning is the first step here. It may turn out to be a perfectly good shooter but only if the barrels are servicable and not too thin to be safe.

[Louis Carter]

Right on I slid the stock back and the safety and triggers worked. Now I can't remove the stock. I have unscrewed the top screw under the lever and the bottom screw behind the trigger But the stock won' t go any further. What's stopping it? Do I have to pry the stock off.