Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Yes, but only to those who have a gun with one of the serial numbers for which a hang tag exists.
I don't know who is holding those hang tags.
.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."
George King, "That's Ruff", 2010 - a timeless classic.
The Following User Says Thank You to Dean Romig For Your Post:
Please go to the Research Tab, the information related to the hang tags are in that section. I have also copied it below:
Parker Original Work Order Tags - A number of original Parker Bros. work order tags were found in the old Parker Bros. office building in Meriden CT by a PGCA committee. The Original Parker Bros.'s work order tags will be made available by contacting:
PGCA Research Committee
P. O. Box 126502
Harrisburg, PA 17112
PGCA members who are the actual owner of the gun to which the tag applies (if such tags exist) . A photo of the gun, making sure the serial number is visible, should accompany each request. These tags are available to PGCA members ONLY and the cost for each tag is as follows:
Trojan to GH grade - $100.00
DH to BH grade - $200.00
AH and above - $300.00
"Click here" to view a complete list of available Parker Bros. Work Order Tags.
The Following 6 Users Say Thank You to Tom Wooden For Your Post:
Please go to the Research Tab, the information related to the hang tags are in that section. I have also copied it below:
Parker Original Work Order Tags - A number of original Parker Bros. work order tags were found in the old Parker Bros. office building in Meriden CT by a PGCA committee. The Original Parker Bros.'s work order tags will be made available by contacting:
PGCA Research Committee
P. O. Box 126502
Harrisburg, PA 17112
PGCA members who are the actual owner of the gun to which the tag applies (if such tags exist) . A photo of the gun, making sure the serial number is visible, should accompany each request. These tags are available to PGCA members ONLY and the cost for each tag is as follows:
Trojan to GH grade - $100.00
DH to BH grade - $200.00
AH and above - $300.00
"Click here" to view a complete list of available Parker Bros. Work Order Tags.
My guns serial number isn"t on the list but thanks anyway.
06-13-2020, 09:49 PM
Hybrid Mode