Quote:
Originally Posted by Frank Srebro
... like most of my friends I use a "baffle" beneath the powder bottle to decrease the range of variability of the powder drops. Now, I don't know if it had anything to do with clumping of powder I left ~6 weeks in the press, but you'll see in the last pic (looking down from the powder bottle) how there are two baffles that each block about 1/2 of the cross-section and cause the powder flow to reverse before getting to the powder bushing in the charge bar.
|
Contrary to what some believe a powder baffle is good for, it can impede powder flow. Especially powder that has had 6 weeks to absorb moisture. You will note that MEC does not make or offer powder baffles for its machines. Only certain aftermarket makers.
Threaded Mode