Parker Chokes:How Tight Did They Come

[Opening Day]

Originally Posted by Bill Murphy

James, the serial number of your gun would indicate that it's a bit late for .740 bores. That size of bore was normally seen on guns made before the turn of the century. Most, I say most, 12 gauge guns in your serial number range were bored at about .729 to .732. Your gun may have been "cleaned up" a bit over the years.

Remember folks, Parker never wasted old parts, (fishtail levers) so you cannot say a gun has been honed without seeing the gun.....As Bill knows well "you can never say never with a Parker"

[Dean Romig]

Originally Posted by James L. Martin

The letter says " The requested chokes were RH modified, LH full " . No pellet counts.

Pellet counts were more often written on the hang tag for the gun and 99.9% of hang tags no longer exist.





.

[JasonPeck]

Super-Fox 32" 12ga .050/.050

[Dakota Jeff]

Parker V 36" made in 1915.
Right barrel measures .736 with .043 constriction
Left barrel measures .737 with .044 constriction
I haven't patterned anything in this gun yet,but it's hard on tall mallards with 1 1/4 oz.bismuth.