Nearly all the parts have been gutted from the forend. Except for the trip slides in the sides of the iron. Someone did it in order to disable the ejectors. Too bad since all that is needed is the removal of two small screws. Not all of the parts.
Certainly a surprise if you think you bought a complete and operating gun.
And, yes it does operate as an extractor gun.
The ejector parts that you are missing are not gauge specific. So they will all work. However, they were all hand fitted. So getting them all working right would be a chore.
There are no schematics or service instructions out there for Parker ejector systems.
I will reply to your email you sent me to get you set up with some parts.
__________________
B. Dudley
|
Threaded Mode