Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
When I had a shell jam in the collet and it wouldn't release, it was due to a rusted primer not ejecting or the primer drop tube going down too far in the fork under the base.
I had 3 MEC's, 1 hydrolic, 1 9000, and 1 grabber. They took up too much bench room. Lucked into a Spolar Gold hydrolic with 12, 20, and 28 gauge die sets at a local auction. Takes about 15 minutes to change dies. Never any adjustments needed after changing dies. Spolars have many similarties to PW progressive machines.
The Following User Says Thank You to Chuck Bishop For Your Post:
I managed to get the hull out by moving the ring back with a screwdriver and pliers to get the hull out. A major use of tools for me I'm just getting back from quail hunting in Georgia and brought back a big case of gout that finally is on the mend so I'll mess with this again shortly.
__________________
There is no hunting like the hunting of man, and those who have hunted armed men long enough and liked it, never care for anything else thereafter...Earnest Hemingway
The Following 2 Users Say Thank You to Rich Anderson For Your Post:
I'm just getting back from quail hunting in Georgia and brought back a big case of gout that finally is on the mend so I'll mess with this again shortly.
Hybrid Mode