Letter Parker Bros. to R. L. Keeney, Somersville, Connecticut, February 4, 1911:
“We are in receipt of yours of the 1st, also gun, which we have examined and find what you describe as a swelling of the stock is in reality due to the fact that the stock is split in the head. This was caused by some strain or blow at some time. We could repair this temporarily by putting a screw or bolt through the head of the stock, bring it up to its original location, and this would cost about $2.00. To clean and repair action would cost about $2.50, rebrown barrels $5.00 and to reblue all the iron parts $2.50. This would put your gun in practically as good condition as new. We would be very glad to do any part or all of this work which you might order. The most satisfactory way to repair the stock would be to put on an entirely new one, which would cost $13.00 net. We have set your gun to one side and will await your further instructions before doing anything with it.”
I've never seen an example of a pinned stock that could be positively identified as "factory work" but as evidenced above such work was offered.
__________________
"Life is short and you're dead an awful long time." Destry L. Hoffard
"Oh Christ, just shoot the damn thing."
Destry L. Hoffard
|
Hybrid Mode