Quote:
Originally Posted by Brian Dudley
Reset rod is likely tight in the hole in the wood. Or gummed up. Remove it and clean it and if still sticky, drill hole out just a hair.
|
Talk about timing. I took my GH out of the case tonight for a wipe down and experienced the same problem Tom did. Lot of force required to push the lever over and the safety button to off. This hasn’t happened before and its a new stock.
I’ve never disassembled a Parker before but once I take it apart the fix sounds simple enough. I’m looking at the parts illustration under technical information on the website but I don’t see the reset rod. Is this the safety pin (part 26) that slides through the stock?
Threaded Mode