Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Or just remove the firing pins by taking out the retaining screws in the breech balls. This would not damage the gun, and if you ever wanted to take up reloading you could make some VERY low pressure loads that MAY be usable in this gun. If you go this route have a good gunsmith measure the barrel wall thickness and assess whatever pitting may be present in them. The gun may not be worth the effort, but there are other 100+ year old JABC's out there being used.
Threaded Mode