Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
If you are going to shoot that gun with those twist and Damascus barrels, I would strongly encourage you to have them inspected and measured for wall thickness first. If they have been bored too thin to remove pitting at some time in the past, they could be dangerous to shoot. If you do get the OK to shoot them, stick with low pressure RST Falcon lite shotshells. You can order them directly from RST's website.
Hybrid Mode