Loading press for 2 1/2" shells

[Ron Scott]

Originally Posted by William Davis

Will be interested it PWs answer too.

William

Just got off the phone with PW. I called the main number and spoke to the person who answered. (Didn't have to get transferred to technical support or the machine shop.) She knew immediately what I needed. All you need is two parts to load 2 1/2" shells -- a cut down sizing die (aka shell holder) -- $37.50 and a wad seating sleeve -- $4.85. Total additional charge -- $42.35 You do have to call for these 2 parts as they are not on their website.

Now I just need to find some decent hulls -- not sure I want to bother peening the primer pockets every time I reload.

[Bill Jolliff]

Originally Posted by Ronald Scott

Just got off the phone with PW. I called the main number and spoke to the person who answered. (Didn't have to get transferred to technical support or the machine shop.) She knew immediately what I needed. All you need is two parts to load 2 1/2" shells -- a cut down sizing die (aka shell holder) -- $37.50 and a wad seating sleeve -- $4.85. Total additional charge -- $42.35 You do have to call for these 2 parts as they are not on their website.

Now I just need to find some decent hulls -- not sure I want to bother peening the primer pockets every time I reload.

Ron,

I use RST hulls for my 12 and 20 gauge 2 1/2" loads with Winchester primers. There doesn't appear to be a loose fit problem with that combo.

I load them about 4 times and toss them as a cautionary move because of the inside base wad. I haven't had a problem but just being cautious.

I have some extra RST hulls if you'd like to try some. Just pay postage. 12's and 20's.

Anybody else also.

Bill

[Ron Scott]

Originally Posted by Bill Jolliff

Ron,

I use RST hulls for my 12 and 20 gauge 2 1/2" loads with Winchester primers. There doesn't appear to be a loose fit problem with that combo.

I load them about 4 times and toss them as a cautionary move because of the inside base wad. I haven't had a problem but just being cautious.

I have some extra RST hulls if you'd like to try some. Just pay postage. 12's and 20's.

Anybody else also.

Bill

Thanks Bill -- but I don't load for 12 or 20, just 16 in 2 1/2"

Where do you get RST hulls? I heard they are actually Cheddite?

[Matt Stolley]

[QUOTE=Where do you get RST hulls? I heard they are actually Cheddite?[/QUOTE]
https://www.grafs.com/retail/catalog...productId/2496

[Bill Jolliff]

Originally Posted by Ronald Scott

Thanks Bill -- but I don't load for 12 or 20, just 16 in 2 1/2"

Where do you get RST hulls? I heard they are actually Cheddite?

Hi Ron,

Yes, I believe the RST hulls are Cheddite's.

I get my hulls from some guys that I shoot with. In fact, we had a clambake yesterday with some 5 stand shooting as entertainment. I have a big assortment of hulls from that and there are a few RST 2 1/2" 16's in there. Maybe a couple dozen? I'll sort them out later today.

I would be happy to send them to you. I didn't see your name in the PGCA membership roster but if you would like them, send me a PM with you address.

And when I go to Ernie's side by side shoot in June in Friendsville PA, I get some RST hulls there too.

Bill