Briley inserts

[Brent Francis]

Thanks Richard,
I will give Briley a call on Monday. Im not sure why the guy didn't suggest it when I had the gun there last week to ask about fixing the bulge. I guess I didn't ask the right questions

[Bill Murphy]

Fix the bulge before you get the Brileys fitted. The fitted tubes are the way to go unless you want to switch them back and forth between guns. I have several sets of Brileys and they are all fitted. Send the gun to Keith Kearcher.

[Brent Francis]

Bill, I talked to Keith Kearcher today and he said he would have to see the barrels and that he would be out of town for couple weeks. I may just drive over to Kerrville after the holidays so I can talk to him in person. I talked to Briley's about inserts and they said that a 20 gauge insert might be a problem since it could bulge out at the bulge in the original barrel but that a 28ga or 410 insert would be no problem. I think I will see what Keith says then go from there.

[Brent Francis]

sorry i misspoke it was kirk Merrington who i talked to since his is in Kerrville which is not too far from here.