410 O Frame?

[Dean Romig]

Ooooh those... the pin spacing actually measured smaller than 00-frame spacing.

Moving ahead though, I thought this thread was about hammerless Parkers.





.

[Bill Murphy]

These were early hammer guns, correct? Is there a hammerless 20 on a 00 frame? Speaking of guns with barrels squeezed onto small frames, there are #1 frame tens and #000 frame 28s. This is information from the linked thread, repeated.

[Twoatlow8]

Years ago at the Las Vegas Show 1996 or 97, I handled a .410 Parker Skeet configured gun on an “O” frame. The only thing that stopped me from buying it was the $17,000 price tag!

[Dean Romig]

Originally Posted by Bill Murphy

These were early hammer guns, correct? Is there a hammerless 20 on a 00 frame? Speaking of guns with barrels squeezed onto small frames, there are #1 frame tens and #000 frame 28s. This is information from the linked thread, repeated.

1. Yes Bill - Lifters are the ones on the tiny frame size with pin spacing less than that of the 00-frame hammerless guns.

2. No, not that anybody is aware of, including the authors of TPS.





.

[edgarspencer]

Originally Posted by Dean Romig

1. Yes Bill - Lifters are the ones on the tiny frame size with pin spacing less than that of the 00-frame hammerless guns.
.

“Less” being a relative term. The firing pin to center of the primer was 1/64” different than the frame size eventuallly given the designation of “00”.