Quote:
Originally Posted by charlie cleveland
6 pt what kind of slug mould do you have for the 10 ga....charlie
|
Have one that a friend in Ohio initially had Accurate Molds cut for a 12 gauge full bore rifled gun , the slug is .730” and weighs 730 grains with s hollow base . I fill the base with hot glue , cut the petals from the SP-10 wad , seat the wad , wrap the slug with .010” Mylar and it shoots pretty well out my 10 gauge gun . I also have a mold based on the Lyman Sabot Slug but for the 10 gauge and made in Russia . That mold drops at about 660 grains , I don’t remember the diameter but it fits nicely inside an SP-10 with the petals still attached .
Hybrid Mode