Parker Coffee Mills (was "Grinders" (Thanks Mark!) ;) )....

[Dean Romig]

That's a very nice old grinder Charlie, thanks!

Dave and I visited a gentleman in Connecticut last Ferbuary who has a very large one which would easily require two men to lift and carry. It too, was in very high condition.

[Mark Conrad]

I have been using a 700 for coffee every morning for about 12 years. Thanks to Allan Swanson for making a new oak base for it. I fine the 700's are much easier to grind coffee with as they are heavy and don't move around (like Charlie's little 200). I have several of the smaller ones but the 700 is the best if you intend to use it.

Most of the 700's have lost the lids. I had some lids made over 10 years ago for the 700. The were made from aluminum. When painted they work well. If anyone has any interest, let me know.

Mark

[Double Play]

Mark,
I would love to see a picture of your 700 if you have one. For those who may have missed it Dave S. posted this pic earlier of coffee mills on display at the PGCA table at Vintagers this year.

[Mark Conrad]

Originally Posted by Larry Frey

Mark,
I would love to see a picture of your 700 if you have one. For those who may have missed it Dave S. posted this pic earlier of coffee mills on display at the PGCA table at Vintagers this year.

I have two 700 mills. I have repainted both and I got decals for them but never installed the decals. There is an antique coffee mill association which I joined back in the late 1990's but I dropped out. I have posted pictures of both 700's which work fine but I only use the one in the kitchen. The other is in my gun room. One had bearings in it which I replaced and the other has bushings. The one in the kitchen was actually froze up when I got it and I had to use wheel puller to get the wheels off. I got it apart, had it sandblasted and put it back together with new bearings and it works great. The bases are different even though both are 700's. One has the lid covers I had made and one has original.

Allan made both bases for me over 10 years ago.

I think I'll make a cup of coffee.

Mark

[Autumn Daze]

Mark,Those are great! I think you have a decent Parker vise also....

[Autumn Daze]

Here are a couple Coffee mill's

[Autumn Daze]

Here is a meat grinder I found a few years back in unused condition. Ya don't see too many of these.

[Mark Conrad]

Originally Posted by Dave Suponski

Mark,Those are great! I think you have a decent Parker vise also....

Dave, the vise gets plenty of use. Thanks

Mark

[Autumn Daze]

Mark,I'm glad you are putting it to good use. Those vises are so well built they will out live all of us...

[NATHAN T LOWE]

Mark,

I am missing half a lid on my Chas. Parker 700 coffee grinder( I am quite sure it is a "700" by the photos I've seen.). Do you still have available the aluminum lids. I would obviously want to purchase the whole top that you have had manufactured.

Regards, Nathan T. Lowe (509) 354-8036