The Short Ten - How many shooting one?

[charlie cleveland]

jack you can buy plastic hulls 3 1/2 10 ga hulls cut them to lengtgh desired and use smokeless powder...pete lester has lots of loads listed we all use on this site...but if black powder is your game them brass shells are the way to go....charlie

[Mike of the Mountain]

Originally Posted by charlie cleveland

jack you can buy plastic hulls 3 1/2 10 ga hulls cut them to lengtgh desired and use smokeless powder...pete lester has lots of loads listed we all use on this site...but if black powder is your game them brass shells are the way to go....charlie

If you don't want to use brass you can use paper hulls. Federal and Fiocchi make nice paper shells. Then you don't need to deal with plastic fouling in your bbls. Use fiber/card wads too and the bbls will be cleaner.

[OH Osthaus]

Originally Posted by Mike Koneski

If you don't want to use brass you can use paper hulls. Federal and Fiocchi make nice paper shells. Then you don't need to deal with plastic fouling in your bbls. Use fiber/card wads too and the bbls will be cleaner.

In 10 gauge? that would be great

[Mike of the Mountain]

My bad, I was thinking 12g. If I loaded BP for 10g I'd try to find paper hulls or use plastic hulls with fiber/card wads. If they were used hulls, I'd throw them out after using it as the heat from the BP may make the plastic deteriorate.

[Mike of the Mountain]

Ballistic Products is selling plastic, new, primed Federal 10g hulls that can be cut down.

https://www.ballisticproducts.com/Fe...tinfo/0621035/




Review:
Tough hulls! 7/10/2014
Im running black powder thru these hulls. I made a handloading set and reload them with steel and lead. 95-100 gr. 2F bp. I have 5 reloads and the hulls still have at least 3 more left. Great, great product
- Josephine Sullivan, ME