Brent,
I have a handful of Parker beaters and haven't experienced the ringing you describe. I've handled many many more but don't often try snap caps unless I am serious about buying.
Bill Murhpy seemed earnest in his suggestion to check the top lever.
Comedians need a stage and the internet is free standup.
I've received much good advice here and have learned alot. Sometimes the most knowledgable and serious will send you a PM that is helpful. Sorry I don't have insight into the problem.
Have you checked the technical data on the home page to look at the parts list and at the hammerless diagram? The diagram might help you with ideas on the cause of the problem I've never had anything go so drastically wrong that I dared take a hammerless apart. The bravest I've gotten is to take the locks off a hammer gun. I do have a Trojan project that needs disassembly to fix a cracked stock properly but if I chicken out I can always use a stove bolt.
Give more than you have received and let us know what the problem is when you isolate the sound. Good luck
Erick
|
Hybrid Mode