Carding, and boiling at the end

[Bill Graham]

Originally Posted by Harry Collins

Dale told me the way he prevented weeping and ruining the work completed was to wax the barrels twice, blow compressed air into the sight and vent holes if they are present. He spent about 20 minutes with a heat gun muzzle to breach, 20 seconds every two inches, both sides to remove any moisture under the ribs.

I use compressed air and heat gun methods, which he told me about as well. I still find that some barrels trap moisture between the braces, and even after blowing them out, the fluid boils out whatever the nearest void is. I'll try the wax angle, but the barrels would need to be quite dry for the wax to adhere well enough to stop what boils out.