Best 20 G hull

[Richard Flanders]

It definitely works. Some you can ream from the back end, others need some reaming from the mouth end. Seems I remember that I did most of mine from the mouth end. The General reamers are readily available from many box and hardware stores.

[William Davis]

Boy you guys showed me something !

I went to my pin punch set. Found one that mikes .2315. It goes in AA primer pockets from the breech end nice fit, and all the way through to the inside of the hull. STS and a old Remington Peters “skeet” goes in the pocket and stops short. Shorter than a primer.

Put a tapered hand reamer in the two Remington hulls from the mouth few twist and the pin punch slides in same fit as the AA hull.

Going to make a 50 shell run ream and load, see if it’s a cure.

William