Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
I have pattern tested both Polywad and RST spreaders in 20 ga some years ago. The pattern work was done with several different guns and the results were fairly consistent. The polywads were passable but barely and the RST's were abysmal. I have no experience with 12 ga, however and the results could be entirely different. Changes to their loads may have also changed since I did the pattern work. The bottom line, if you go the spreader route then a trip to the pattern board is in order.
Threaded Mode