2 1/2" cheddite 20 ga loads

[edgarspencer]

Harold, I use the SG20s wad, 7/8oz, and 17.0gr of PB.
I also recall the cam took some finessing but now they are perfect crimps, and a nice taper to the end of the shell. These are about 8000psi, 1175-1190 fps loads and I only use them in my steel barreled 20s.

[Harold Pickens]

Sounds like a great load Edgar, only trouble is I sold you all of my PB.
What are you shooting in your Damascus 20's?
I do have GD, Intrnational, Universal, 20/28, 7625, an Unique--and have found suitable loads with all those powders, and the components I have on hand.
How is your back doing?

[edgarspencer]

I shoot my Damascus GHE 20 so infrequently, I just use whatever RST suits.
Back is not bothering me too much. But, I had to stop wearing the Flector patch a few days ago. Had to cut out any Pain meds except Tylenol. Get the new Hip on Tuesday.

[C.O.B.]

Harold I use the CB1075 wad a Win 209 primer and 20/28 powder. IIRC its in the 14 gr area but I'd have to look to make sure. All guns are different so you should work up or down accordingly. I only load the 2 1/2 inch RST hull. I use this load in both Damascus and fluid steel barrels. Velocity is approx. 1100 FPS.