Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Beautiful work Brian. My question is, is this a cost effective process for 0 and 1 grade guns, or is tig welding the lug the only way to get there without breaking the bank? Of course, I also have a VHE grade with a .003 feeler gauge shim on the roll pin that has worked for almost 10 years now, but I must carry the gun assembled and have to replace the shim every few years as it creeps up on the barrel stop. I'd rather have a permanent fix, but dollars matter. Thanks.
The Following User Says Thank You to Mike Poindexter For Your Post:
Hybrid Mode