Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
I use 4198 as Sherman Bell recommended - 40% of 4198 of a BP load. That would be 24 grs of 4198 in my 40/60. Being a little cautious seeing how I was using a rifle barrel liner in my 10ga Remington and it was what I thought a bit thin, I started at 20.5grs and settled on 21.5grs. I also used some cotton balls for filler. The 40% formula seems to work just fine. Mild recoil and good groups.
Threaded Mode