First hunt with my NH short 10 ga.

[Eric Johanen]

Would you be kind enough to supply your load data? Always looking for good information. Pressure? Sounds like a good working load and am in need of no-tox data for my guns. Nice to see the old ones back doing what they were built to do.

[Carvel]

Eric, these were Cheditte hulls and primers cut to 2 7/8, 34gr of 4756, PT1044 wad with one wrap of heavy mylar wrap in the shot cup, 1 1/4 oz of ITX BB,s (80 pellets I counted them for every shell, over shot card with a roll crimp sealed with duco cement to keep out moisture. I have not had them tested, but by comparison to the bismuth data and talking to people at Balistic Products, it should be around 5000 psi. and about 1150 fps. They seem mild with low recoil when you shoot them. I am not one to do much experimenting with loads since there are so many variables which can be dangerous. You decide for yourself. Hope this helps. Carvel