Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
VH through GH grades used a brass shield held in with two brass nails.
Higher grades used Silver and Gold ovals also held in with nails.
Later Remington era guns were not held in with nails. They were soldered to a wood screw on the back side. So no evidence of fastening is shown on the outside.
When i install these, i glue them in with acraglass and then pin them with the nails and dress them off for an original look.
Threaded Mode