Barrel flat - frame size stamps

[Bill Graham]

Thanks. Doublegun lists blemished two volume sets for $295. Can't swing that anytime soon, but I can manage the serialization book. Thanks. Now I just need a barrel. There's one online that looks like it would work, but there are no measurements listed to determine if it's a viable option. The only markings cited are:

"marked Parker Bro Makers Meriden, Conn. Damascus Steel. It is pat Apr 11, 1876. It is 12 gauge with 30 inch barrels. It is also marked D5 with a little 10 above. Original note in left barrel states serial number 58464."

[OH Osthaus]

The 5 and offset 10 is the unstruck barrel weight 5lbs 10oz

[Bill Murphy]

You're going to have to send us a bunch of pictures to solve the mystery of small frames with big barrel weight. We doubt that you have a #1 or #1 1/2 frame gun. In the place of pictures, you could send us measurements.

[OH Osthaus]

I think he is looking at one for sale, not one he has in hand

if it's the one I know of. The seller says he cannot find the frame size marked

[Gunner]

Bill watch Ebay for copies of both books. Sometimes used copies come up for sale at a good price. Some sellers want as much or more as you can buy the blems for.
Also check out boxes of gun books at auctions for these as well.
Do you have the original barrels for your gun to take measurements from?
erick

[Bill Graham]

Originally Posted by Erick Dorr

Do you have the original barrels for your gun to take measurements from?
erick

Yes. The original barrels are stamped 1 1/2 as well. I'm assuming the frame size is 1 1/2 since the serial numbers all match, but I haven't measured the distance between the pins or other areas yet.

[Bill Murphy]

What rib marking is on the 5-10 barrels? Specifically, the type of steel.

[Bill Graham]

Originally Posted by Bill Murphy

You're going to have to send us a bunch of pictures to solve the mystery of small frames with big barrel weight. We doubt that you have a #1 or #1 1/2 frame gun. In the place of pictures, you could send us measurements.

The barrel I need to replace is stamped 1 1/2, and the struck weight on it is 3lbs 12oz.

In searching for a replacement barrel I found one that had no frame size marking, but the struck weight above.

I'll measure the distance between the pins tonight.