Help with RST 2 1/2 low pressure loads for 12 gauge

[William Davis]

Kirk

I may have missed something in the exchanges . To be clear the stack with fiber wads loads goes in this order

Powder charge

Nitro card used as it comes, it's what provides the gas seal. Needs to fit the hull width. You can buy them thick or thin.

Fiber wad split to make your stack height come out right. How the hull Crimps Or rolls will tell you how thick the fiber wad needs to be

Shot

If you fold crimp you are done

If you plan to roll crimp add over shot wad before rolling.

The fiber wads, able to split to size, allow varying powder and shot charges to come out to the proper stack height. They have some spring or compression ability, makes for a nice tight load.

Make sense ?

William