 |
|
 |
|
 |
|
 |
| Notices |
Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and
You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register:
Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Hi Unregistered,
On July 29th, this site will be moving..! No, really - it's "moving" to another physical location - including servers, gateways, routers - everything - including my coffee cup...
So, from the date of July 29th through July 30 or 31 (shooting for these dates, but - as always, I'm at the mercy of my ISP who has to install the lines to the new location - and we actually get them running ;) ). But - this site, cloud servers and main web will be OFF LINE.
Now, please save these dates!! Please - don't be "that guy" who emails me on the 30th to tell me you "can't open the Parker Website". I'll already know it is offline - and also know that you are "that guy"...
I'll take this notice up and down over the next week or so - and leave it up during the final few days before shutting it off on the 29th..
John D.
|
 |
05-19-2010, 11:04 AM
|
#1
|
Member
|
PGCA Lifetime Member Since Second Grade
|
Member Info
|
Join Date: Jun 2009
Posts: 17,367
Thanks: 7,294
Thanked 10,917 Times in 5,708 Posts
|
|
Jim, I hit the "thanks" button because you not only gave us the anecdote about welding the pinhole in a barrel, but you introduced our readers to the Federal SO wad and the knockoff of that wad. They are wonderful wads, much more resistent to tipping in the loader than are the Winchester wads made for the same light loads. Tipping is a big problem for consistent loads and should be eliminated as much as possible. Just one look at the Federal SO wad or its knockoffs will show you that it is much stronger and resistent to tipping than is the Winchester wad. I have been using the SO for 7/8 ounce loads for many years and continue to use it today.
|
|
|
|
 |
|
 |
05-19-2010, 11:34 AM
|
#2
|
Member
|
Research Chairman PGCA Lifetime Member
|
Member Info
|
Join Date: Nov 2008
Posts: 3,071
Thanks: 1,334
Thanked 5,707 Times in 1,577 Posts
|
|
I've been using the components Jim talks about for years but within the last 2 years I've switched from Clays to Clay Dot due to it being a little cheaper.
If you look at the Alliant web site for a 1oz load, you'll notice that load using Clay Dot, produces 5,850psi. Checking the Hodgdon's web site, the same load produces 7.700psi. A difference of almost 1,000psi. This data is for the Gold Medal Plastic hull but I would think substituting a Top Gun or Estate hull would be similar.
Since Alliant says Clay Dot is similar to Clay's, I e-mailed Alliant to make sure their data was correct per the psi. According to their reply, the data is correct.
I usually stay at 17.5 grains of Clay Dot in the Estate hull whether or not I use 1oz or 7/8oz of shot however in the winter I stay with 1oz due to incomplete burning and some off sounding loads when using 7/8 oz in real cold weather
|
|
|
|