Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Residual crud- holy cow, some of you guys must work in a hospital. All I've ever seem is a little unburnt powder from the last shot. You want crud, shoot a hundred or more black powder shells a day. Now you got crud, and lots of it.
John, I am using guns around 130 years old and have stayed away from the pressure increase when using magnum primers. I've just stayed with low pressure powders that burn well in colder weather. The fouling left by smokless powders is really not a problem but I did take notice of the cleaner aspect of the re-formulated Red Dot powder. I like it! Paul, have you tried out GOEX Old Eysnford powder. I shot a charity event a few weeks ago using OE 2 fg. Paper hulls with hard nitro cards and felt wads, 1 oz. finished with a roll crimp and could have very easily shot the 50 round course with very minimal fouling. At the last station the bores showed very light fouling and were still a bit bright. I finished up with 2 shots from each barrel using RST light smokless loads to burn them out for easy cleaning once home. Now I'll forget about the smokless and just shoot the whole course with the OE 2 fg. Old Eynsford is a very good black powder.