Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Once you get it open after firing, check the primer. If there is drag marks on it then you can do one of two things... try an different ammunition/primer and see if the problem solves itself OR you re-dress the tip of the hammer as Edgar suggested. I have had this issue happen with a flattened hammer tip personally. But primers can be soft and cause issues as well.
If there is not drag marks on the primers, then you have another issue.
Threaded Mode