I had Larry DelGrego (Lawrence) take a similar dent out of my 20 gauge GHE while he talked a mile a minute. He used the original Parker Bros. "Slugs". Push one that would barely go into the dent and tap a number of times with a little hammer around the dent on the outside of the barrel. Then repeat with a slug a couple of thousands larger. Kept repeating till the dent was gone. He did this job after completely stripping and cleaning the gun and replacing the little ejector springs. Never stopped talking and only charged me $60 for the total job. Of course, this was 10 or 12 years ago. Needless to say, I was a happy camper.
|
Hybrid Mode