Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
The bottom rib on my Sarycuse gun came loose, also the last inch.
Pretty simple fix as was already mentioned secure the rib then heat it up. The reason to wire up the rib is in case you get handy with the torch and melt more solder than you should, it won't go anywhere. It will just stay put and cool and still be soldered.
Good luck, Tom
Threaded Mode