Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Sounds like you have an ejector gun. For the forend to install, both the ejector hammers on the forend as well as the hammers in the action need to be COCKED.
The forend. Hammers can be cocked by pushing back on the hammers with a block while the forend is in a vise or some other way of holding it.
The gun can be cocked by carefully opening the barrels while fully pushing in on the unhooking pin in the nose of the frame .
Hybrid Mode