Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Thanks for all of the replies so far. Would anyone hazard a guess as to whether or not the bore diameter would/might be based upon frame size. My lifter is on a # 3 frame, and it has the step from chamber to bore ( no forcing cone ). Sometime today I will measure the chamber diameter with my High Tech Tape and Dowel, and will post it later
The Following User Says Thank You to Austin J Hawthorne Jr. For Your Post:
Threaded Mode