Quote:
Originally Posted by Joe Bernfeld
Chuck, as I said (yes, Dean, I said it before  ), it doesn't seem possible to measure the thickness of the forend metal accurately without removing the wood (which I prefer not to do). |
Actually Joe, I can think of a couple of ways to measure the depth or thickness of both types of forend on the same gun. The first way is probably the simplest. Begin with a flat, stable, unobstructed work surface. Lay the inverted gun on the work surface (top rib down) with the bead just off the edge of the surface. With one type of forend or the other firmly in place on the barrels measure the distance from the work surface to the highest point of the latch and record it. Now measure from the work surface to the lowest point of the latch in order to establish an angle if such angle exists. Record this number. Now, replace the forend with the other type of forend and repeat the process. I suggest the measurements should be the same.
Threaded Mode