2 7/8" 10ga Reloading Data

[J.B. Books]

Originally Posted by Mark Garrett

Need a little help .Not very familiar with 10Ga loadings , but being that I just bought an Ithaca Super 10ga I need to start . What Remington hulls is being referred to in the spread sheet with these designations , Rem whtltr , Rem OS, Rem blkltr . Can all the Remington hulls with a plastic base wad be used interchangeably ?

Thanks.

Congrats on the new gun. Rem Hulls white letter is as the name applies, they are factory loaded hulls stamped with white letter marking. I have a bunch that were factory busmuth loads. Rem black letter, same thing, black letter stamping, I have seen that on what were factory steel shot loads. Rem OS, I am not sure what OS stands for. I purchased some unfired Rem hulls with no markings for a snow goose hunt a couple of years ago and loaded them with SR7625 and Bismuth 1's. I shot them through a Twist barrel Parker NH and Rem 1894 Damascus gun without issue. If the Remington hulls have a plastic base wad I load them the same but that's just me.

[Mark Garrett]

Thanks for help the help . I bought some new Remington hulls from Precision , so they should work just fine . I have 700x on hand and will load some 1 1/8 loads and try her out . I also have a fair amount of 7625 on but am saving that for my 16ga LP hunting Loads .

I plan on putting some Bismuth loads together for the short 10 , but don't really need or want low pressure , so I will develope something with another powder and send them to Tom Armburst for testing .

Thanks again for the Explanation .

Mark