Quote:
Originally Posted by William Davis
Am I missing something or is my theory that open jobs go wrong more that right correct. Are there gunsmith that can alter chokes that can’t be spotted from factory? William
|
1. Yes
2. Yes
Th chokes were cut from the rear using the bore to center the cutter. Parker Bros. chokes are sometimes 5" to 6" long but generally around 3". There is often a parallel section at the muzzles that measure as much as 3/8" long.
There are a few smiths who can properly cut chokes. Mike Orlen in Amherst, MA, Abe Chaber in CT, and Kirk Merrington in TX come to mind.
Threaded Mode