Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Charlie, just be very careful when you remove the side plate. It is very easy to chip out some stock wood that has been "glued" to the plate from old oil. I have found the easiest way to get the plate moving from the stock is to loosen the plate screw enough that it is proud to the left plate and then tap it gently with a plastic hammer. This will cause the right plate to move. Good luck. Bill
The Following User Says Thank You to Bill Zachow For Your Post:
Hybrid Mode