Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
"Parker Standard" mid-bead placement on the rib as quoted from a 1929 factory spec sheet: for non-vent rib barrels up to 28 inches, bead placement @ 14 inches; for barrels 28-32 inches, bead placement @ 16 inches UNLESS OTHERWISE SPECIFIED BY ORDER. LDG Sr. cut a nifty gauge out of 1"x 1/8"x 36" that, when hung over the muzzle, "center-punched" the correct FACTORY placement of barrel beads. What criteria were used after-market is anybody's guess.
The Following 2 Users Say Thank You to Kevin McCormack For Your Post:
Threaded Mode