Quote:
Originally Posted by Brad Bachelder
If lock up is the problem, the spring can cause looseness at lock up. Also from the Recase the lever or the bolt could be binding as Those parts often require minor fitting on reassembly after Case. The type of gap that was stated, makes me think that the hook is the issue. Generally Recasing will tighten the barrel/receiver fit by about .003. It is hard to speculate without seeing it.
Brad
|
Well, if it comes back with issues still Brad you'll see it. Again- nothing leads me to believe this fellow is not extremely competent given the feedback I've gotten from LC smith folks so I am assuming all will be resolved. Yet, I am not going to continue sending it back and forth.
Threaded Mode