Yes, C-H makes shell holders and a shell pusher/flat plate which is required for use with their swaging dies. The swaged case is removed from the dies using a dead drop hammer and wooden dowel.
PS: The new Winchester hulls come out of the C-H dies at .929 max head diameter. That is a darn tight fit in Parker chsmbers. The SAAMI max chamber is .929" while the CIP minimum size is .931". Go figure. I am having a smaller die made...
__________________
Don't hunt with a gun that will embarrass your dog!
USMC Retired
USMC Distinguished Marksman
USMC Distinguished Pistol Shot
NRA Benefactor - Ring of Freedom member
|
Hybrid Mode