Model 12

[Bill Zachow]

They were and a friend had one with a 900 cc kit and a turbo charger. He let me take it for a spin. He told me to take it easy as it was pretty hot. Not being too smart, I went through the gears at the red line and when I dropped it into 5th, at well over 100 mph, the front end came about 4 feet off the ground. When I got everything back under control, I took it back to my friend at about 45 mph. Mine was fairly stock with only a cam and pipes, so I did not really know what to expect. Now, I do.

[Scott Gentry]

Remove trigger group, push bolt forward and up and hold in place. With small screwdriver engage the breech bolt lever lock( seesaw looking lever on side of bolt. ) this will hold bolt in place ( this normally is engaged when action slide is moved forward during disassembly) while you reassemble trigger group. Take care that the cartridge cut off is properly fitted into it's slot, don't force anything. When front end is reinstalled and action slide engauges bolt it will unlock the lever.

Good luck.