20 gauge 2 1/2 inch loads

[Double Play]

Originally Posted by Bruce Day

So what are the measured chamber lengths for SN 208,485?

Not sure yet as it went right to Mr. Chaber for a good cleaning but it will be ready for the Southren so you will see it there. It's an interesting gun as it is a very late Damascus gun.

[C.O.B.]

I load all 2 1/2 inch hulls from 12, 16, 20 & 410 For everything except the 410 I use RST hulls which are Cheddite hulls and can be ordered through various reloading supply houses. If you come to any of the bigger sxs shoots such as the Southern or hausmanns you can easily scroung once fired RST hulls. I can't get to the load data for my 20ga loads at the moment but I'm using 20/28 powder and 7/8th or 3/4 oz shot charges. These are all low pressure loads, easy on you and your Trojan.

[William Davis]

Rich

How are you crimping ? Roll or fold.

Bill

[C.O.B.]

Fold, I think it's a six star crimp. I can't get to anything in the gun room as it's chucked full of mounts and stuff as I'm having the basement finished off. They just have trim to do so by the end of next week I can get you my load data. I'm using a Mec 9000 press.