Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
the best way is to weld the hook. then re-cut the hook on a mill. but I have also had good luck with soldering a steel shim to the hook. that will last for years. use a small torch to tint the hook with solder then clamp the shim in place with a piece of dowl rod ,re-apply heat and sweat the two together. or send the whole thing to batchelder.
Threaded Mode