i cannot see that anything is missing except a measure
the decapping rod should be under the knob of the wood plunger rod, the knob can be switched from one end to the other
to decap the hull, it sets on the round wood piece with the hole and tap the rod to drive the old one out
the folding piece with the round opening is the primer set tool
the funnel goes in the hull to support the process of powder, wad and shot
the small ring is not for reloading - its to remove a stuck shell from the chamber
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE
|
Threaded Mode