Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Hi Unregistered,
On July 29th, this site will be moving..! No, really - it's "moving" to another physical location - including servers, gateways, routers - everything - including my coffee cup...
So, from the date of July 29th through July 30 or 31 (shooting for these dates, but - as always, I'm at the mercy of my ISP who has to install the lines to the new location - and we actually get them running ;) ). But - this site, cloud servers and main web will be OFF LINE.
Now, please save these dates!! Please - don't be "that guy" who emails me on the 30th to tell me you "can't open the Parker Website". I'll already know it is offline - and also know that you are "that guy"...
I'll take this notice up and down over the next week or so - and leave it up during the final few days before shutting it off on the 29th..
Restoration projects are not all bad in my opinion. A while ago I posted some photos of an old DH I bought that was in very rough condition. True - I am guilty of sometimes bringing home three-legged dogs. A restoration project like this is definitely not something one should do with hopes of making money. But I just couldn't let the old gun wither away and die.
My intent was to have Brad Bachelder work his magic on the gun and the results are shown below. Some types of flaws are just too hard or expensive to fix. Pitting along the rib and some shallow pitting on the bottom of the receiver can't be undone without great effort and expense. As long as the tubes are sound then the potential for restoration is there. All in all I think the end result speaks for itself.
__________________
Blissfully retired and doing exactly what my better half tells me.
The Following 9 Users Say Thank You to John Havard For Your Post:
OK - so here are some pictures. Gun has 30" barrels and weighs 7.2 pounds. It needs a total restock. The junk that was put on there is not salvageable. It does have the skeleton butt plate on it though. At least I have the original for a pattern. It too is not salvageable. Its been cut for a recoil pad, a huge chuck is gone from it , someone did a terrible job grafting a new piece on the front, and a ginat crack is running through it.
Starting with the worst- this is the barrel damage. It starts 11 5/8 inches from the end of the muzzle and runs for 1/4 inch back towards the receiver. It looks like someone took a ball peen hammer to it.