Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
IMO if your going have the frame re-case hardened. You should send the whole gun to the shop you've chosen to do the work. Have them do the dis-assembly & re-assembly. This way they will be able to fit the gun back up correctly after the re-case heat treatment process.
Do yourself a favor & call Brad Bachelder or Doug turnbull before you take the gun apart. Ask them some questions & follow their advice.
Sometimes saving a buck on the front end will cost two bucks on the back end.
Hybrid Mode