Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
The corrosion on the back of the lower grade inserts is what causes them to push up off the stock. More so on older hammer guns since they have been allowed to corrode longer. I have been able to remove them, clean both the insert and the inletting and have them drop right back in without having to deepen the inletting at all.