Ignorant and Confused

[Richard Flanders]

Stacey: You certainly don't sound ignorant and confused to me. You're doing everything right so far. Get advice here before you do anything and don't do anything to hurt the gun. You're right on track so far so keep it up. You'll get all the help you need here.

[Bill Murphy]

Measure the exact distance between the firing pin hole centers on the gun without frame size markings. We will tell you what the frame size is.

[Stacey Tillman]

If those are the pins that the hammers strike, then center to center is just a hair under 32mm. Thank you for your help. I am enjoying learning about these guns.

[Bill Murphy]

That would be 1 1/4 inches. In an early gun, that would be a #2 frame. It should be the same pin spacing as your other gun.