Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
The lever is retained by a small set screw in the left side of the upper tang. It is located right on the radius of the tang. They can sometimes be stubborn in coming out.
That screw and the spring have to be removed. Then the lever will pull right out the top.
To remove the spring. Compress it and pull down to free the retaining pin and then pull it out.
Threaded Mode